TMR Joysticks, Hall Effect Triggers, and 20 Dollars Under Nintendo: 8BitDo Announces the GC Bluetooth Gamepad Inspired by the GameCube WaveBird for Switch 2

Exactly twenty-five years to the day after the Nintendo GameCube made its North American debut on November 18, 2001, peripheral maker 8BitDo is marking the milestone with the official reveal of the 8BitDo GC Bluetooth Gamepad. Built as a modern successor to Nintendo's legendary 2002 WaveBird wireless controller, this new gamepad targets Nintendo Switch 2, original Switch, and Windows PC players while undercutting Nintendo's first-party wireless pad by a full $20.
10-Bit TMR Joysticks With Octagonal Gates and Hall Effect Triggers: Inside the Specs
While Nintendo's own wireless retro controllers still rely on traditional potentiometer modules prone to mechanical wear, the official spec sheet for the GC Bluetooth Gamepad overhauls the internal sensors from the ground up. Following the blueprint of the 8BitDo Pro 3 Tomb Raider controller for Nintendo Switch 2, the new pad equips both thumbsticks with TMR (Tunnel Magnetoresistance) joysticks backed by a 10-bit ADC sampling chip.
This magnetic sensing architecture delivers sharper directional precision and lower power draw while eliminating stick drift altogether. Crucially, 8BitDo kept the signature octagonal gates surrounding both the primary left analog stick and the yellow C-stick on the right, giving competitive Super Smash Bros. Ultimate veterans and GameCube fans the exact eight-way physical notches their muscle memory expects.
- Hall Effect Linear Triggers: Both the L and R shoulder triggers use spring-loaded Hall Effect magnetic sensors, providing smooth linear travel, consistent tension, and a cushioned bottom-out feel at the end of every press.
- Symmetrical Z and ZL Bumpers: Whereas the 2001 GameCube controller only featured a single Z bumper on the right shoulder, 8BitDo adds a matching ZL bumper on the left side so modern Switch 2 and PC titles map naturally without missing inputs.
- Classic ABXY Layout and Modern Shortcuts: The oversized green A button flanked by the red B button and kidney-shaped X and Y buttons returns intact, joined by a cushioned D-pad, a dedicated Capture button for screenshots and video clips, and a Turbo function. However, the pad omits a dedicated Switch 2 "C" button for GameChat.
- Single-Rotor Rumble Motor: Weighing in at 218.1 grams (140.1 × 102.95 × 67.6 mm), the matte-textured shell houses a single-rotor rumble motor engineered to replicate the distinct vibration profile of the original NGC hardware.

Tri-Mode Connectivity Across Switch 2, Windows PC, and Original GameCube Hardware
Beyond its anti-drift sensors, the controller stands out for cross-platform flexibility that Nintendo's Switch Online pad does not offer out of the box. Much like the recent 8BitDo Ultimate 3C+ TMR controller for Xbox and PC, 8BitDo prioritizes low-latency versatility by bundling a color-matched 2.4GHz wireless USB adapter styled after an original GameCube plug right in the box.
Players can switch between three connection modes: Bluetooth 5.0 on Nintendo Switch and Nintendo Switch 2 (firmware 3.0.0 and above), 2.4GHz wireless on Switch 1/2 and Windows 10 (1903+) or Windows 11 PCs, or wired USB-C via the included cable. Better still, retro hardware collectors who own an original Nintendo GameCube console (or a backward-compatible RVL-001 Wii) can pair this gamepad wirelessly to original hardware using the 8BitDo Retro Receiver for NGC (sold separately for $19.99).
| Specification | 8BitDo GC Bluetooth Gamepad | Official Nintendo GameCube Controller (Switch 2 NSO) |
|---|---|---|
| MSRP | $49.99 USD | $69.99 USD |
| Thumbsticks | Anti-drift TMR (10-bit ADC) + octagonal gates | Standard potentiometers + octagonal gates |
| L / R Triggers | Hall Effect linear magnetic triggers | Dual-stage analog triggers |
| Connectivity | Bluetooth 5.0, bundled 2.4GHz USB adapter, and USB-C | Proprietary wireless and USB-C |
| Platform Support | Switch 2, Switch 1, Windows PC (and NGC via receiver) | Nintendo Switch 2 |
| Launch Colors | Purple (Indigo) and Orange (8BitDo eShop exclusive) | Indigo only |

Price, Indigo and Spice Orange Editions, and December 2026 Release Date
Priced at $49.99, the 8BitDo GC Bluetooth Gamepad comes in at a full $20 less than Nintendo's $69.99 wireless GameCube controller. Pre-orders are live starting today ahead of its official shipping date on December 10, 2026. Two iconic 2001 colorways are available at launch: classic Purple (Indigo) across retail partners and a vibrant Orange Edition (inspired by Nintendo's fan-favorite Spice Orange controller) sold exclusively through the official 8BitDo eShop. For purists who want to keep the exact plastic shell of their vintage wired pad, 8BitDo also continues to sell its drop-in Mod Kit for Original NGC Controller at $25.98.
My Test Bench
Delivering a WaveBird-inspired wireless controller at $49.99 while packing 10-bit TMR thumbsticks with octagonal gates, Hall Effect linear triggers, and a bundled 2.4GHz USB dongle for PC and Switch 2 is a textbook hardware move against Nintendo's $69.99 first-party pad. Granted, the slightly fuller center bridge isn't a 1:1 shell clone of the 2001 original, and skipping a dedicated Switch 2 GameChat button is a minor trade-off. Still, if you want a drift-proof GameCube layout for Super Smash Bros. Ultimate, Nintendo Classics on Switch 2, and PC emulation without paying a nostalgia tax, 8BitDo's spec sheet hits every mark that matters.


















