12.9 kg Aluminum Exoskeleton and Nickel-Chrome Mirror Finish: Jonsbo Unveils the BO400 VP Panoramic PC Case

PC chassis specialist Jonsbo, working through its high-end Jonsplus division, is taking its flagship dual-chamber enclosure a step further with the official debut of the Jonsbo BO400 VP (Vacuum Plating). While the original model relied on a matte brushed aluminum finish, this new variant subjects its external structural frame to a multi-stage nickel-chrome vacuum plating process for a full mirror-like sheen. Weighing 12.9 kg empty, the ATX case pairs a three-sided tempered glass showcase option with hidden-connector motherboard support and room for up to three 360 mm liquid-cooling radiators.
A CNC-Machined Aluminum Exoskeleton With 12H Vacuum Plating
Unlike standard panoramic cases built solely around stamped steel sheets, the BO400 VP anchors its chassis inside a load-bearing aluminum alloy exoskeleton. According to the official product specifications published by Jonsbo, the outer frame interlocks 12 hollow aluminum profile pillars measuring 2 mm thick with 8 die-cast aluminum corner joints using mortise-and-tenon joinery. A 6 mm CNC-machined aluminum plate forms the right-hand front fascia, while the internal skeleton combines 0.8 mm and 1.2 mm SGCC steel panels.
To achieve its reflective metallic surface without leaving the soft aluminum vulnerable to scuffs, the factory applies a four-step treatment: precision mirror polishing, a copper-nickel base coat, a hydro-electroplated nickel-chrome primer, and a final arc-ion PVD vacuum coating. This surface engineering delivers a certified 12H surface hardness rating, providing substantial resistance against wear and micro-scratches during system builds. A subtle 5V ARGB lighting ring surrounds the front power switch to accentuate the dark chrome reflections.
Three-Sided Tempered Glass or Mesh Top: A Modular Dual-Chamber ATX Layout
Measuring 474 mm in depth, 311 mm in width, and 489 mm in height, the Jonsbo BO400 VP lets builders tailor the top panel to their hardware priorities. Users can install a third tempered glass panel across the roof for an unobstructed 270-degree view spanning the front, left side, and top, or swap in a ventilated metal mesh top cover when high-wattage components demand unrestricted exhaust airflow.
Inside the main chamber, the motherboard tray accommodates Mini-ITX, Micro-ATX, and ATX boards, complete with precision rear cutouts for back-connect ecosystems including ASUS BTF, MSI Project Zero, and GIGABYTE Project Stealth. The secondary chamber behind the tray houses standard ATX PS2 power supplies up to 200 mm long alongside drive cages supporting up to four 3.5-inch HDDs and two 2.5-inch SSDs.

Triple 360 mm Radiator Support and 435 mm of GPU Clearance
Cooling capacity is engineered for custom loops and high-TDP processors, supporting up to ten 120 mm fans and three simultaneous 360 mm radiators mounted across the top (in mesh mode), side bracket, and bottom floor. Those building custom liquid loops with heavy brass blocks like the Thermal Grizzly DeltaMate MPII water block will also benefit from a swing-out bottom fan bracket that tilts open to simplify lower motherboard header wiring. Air-cooling enthusiasts have up to 173 mm of CPU cooler height clearance.
Across its 8 PCIe expansion slots, the BO400 VP provides 435 mm of graphics card clearance and ships with an adjustable anti-sag bracket out of the box, leaving ample room for flagship GeForce RTX 5090 and Radeon RX 9000 cards fresh off a thermal maintenance session using Thermal Grizzly's TG PadMate gauge and Minus Pad 8 kit. Front I/O is positioned along the lower-right fascia and includes one USB 3.2 Gen 2 Type-C (10 Gbps) port, two USB 3.0 Type-A ports, and a 3.5 mm combo audio jack. Priced at 1,999 RMB in China (roughly $299 USD before taxes), the BO400 VP targets enthusiast showcase builds.
| Feature | Jonsbo BO400 VP Official Specifications |
|---|---|
| Dimensions & Weight | 474 mm (D) x 311 mm (W) x 489 mm (H) / 12.9 kg net weight |
| Frame & Materials | 12x 2 mm aluminum pillars, 8 die-cast corners, 6 mm CNC front, 0.8/1.2 mm SGCC steel |
| Surface Treatment | 4-stage Nickel-Chrome PVD Vacuum Plating with 12H surface hardness |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX (supports ASUS BTF, MSI Project Zero, GIGABYTE Stealth) |
| Hardware Clearances | GPU up to 435 mm, CPU cooler up to 173 mm, ATX PSU up to 200 mm |
| Cooling & Radiators | Up to 10x 120 mm fans and 3x 360 mm radiators (top mesh, side, bottom) |
| Storage & Front I/O | Up to 4x 3.5" HDD + 2x 2.5" SSD / 1x USB-C 3.2 Gen 2, 2x USB-A 3.0, 3.5 mm Audio |
| Launch Price | 1,999 RMB (approx. $299 USD before taxes) |
Check Availability Jonsbo PC Case Availability on Amazon→
My Test Bench
Applying arc-ion PVD vacuum plating to an extruded aluminum exoskeleton is a smart way to solve the durability issue that plagues most glossy showcase enclosures. Achieving a 12H hardness rating across twelve 2 mm structural pillars and eight die-cast corner joints puts the BO400 VP in a completely different league from cases that rely on chromed plastic trim. What makes the design practical in my book is that Jonsbo refuses to lock builders into a thermally restrictive glass box: being able to swap the top glass panel for a ventilated mesh cover and run three 360 mm radiators simultaneously makes this a legitimately capable home for a zero-cable BTF flagship rig.


















