34mm-Thick 140mm LCP Fans and 450W TDP Rating: SilverStone Unveils the Hailstone 420 AIO Liquid Cooler

Following the release of its 360mm sibling built for heavy workstation processors and high-end desktop rigs, SilverStone Technology has expanded its all-in-one liquid cooling lineup with the Hailstone 420 (model SST-HT420). Engineered to handle sustained thermal loads of up to 450W CPU TDP, this new 420mm closed-loop cooler trades standard 25mm frames for three industrial-grade 140mm fans with an increased 34mm thickness, paired with an enlarged copper cold plate built to cover massive AMD Ryzen Threadripper PRO heatspreaders alongside mainstream desktop sockets.
Three 140 x 34mm Liquid Crystal Polymer Industrial Fans
The standout mechanical upgrade on the 420mm variant lies in its fan geometry and blade material. According to the official product specifications published by SilverStone Technology, the cooler ships with three 140mm industrial fans measuring 140 x 140 x 34mm each. Adding 9mm of depth over conventional 25mm-thick fans allows for steeper blade angles crafted from Liquid Crystal Polymer (LCP), a high-tensile material prized for resisting blade flex at high rotational speeds. Each fan relies on a dual ball bearing assembly rated for a 100,000-hour MTTF under continuous operation.
Controlled via standard 4-pin PWM headers at 12V, the three 140mm fans operate between 800 and 2,500 RPM. At full tilt, they push up to 123.8 CFM of airflow and generate a commanding 7.66 mmH2O of static air pressure while keeping acoustic output capped at 38.8 dBA. Compared directly against SilverStone's own Hailstone 360 (SST-HT360), whose three 120 x 25mm LCP fans spin up to 3,000 RPM to deliver 95.1 CFM and 5.2 mmH2O at 39.6 dBA, the step up to 140 x 34mm impellers boosts static pressure by roughly 47% while trimming both peak rotational speed and noise.
That airflow is channeled through an aluminum radiator measuring 456mm in depth and 28mm in thickness (bringing the combined radiator-and-fan stack to 62mm). Eagle-eyed builders inspecting SilverStone's spec table will spot a small copy-paste typo carried over from the 360mm sheet listing the radiator width as "120mm" instead of the 140mm width required by three 140mm fans. Coolant travels through 460mm braided rubber tubes, giving builders ample reach inside full-tower and workstation chassis.

Six-Pole Pump Motor, Threadripper PRO Cold Plate, and IMF70 Support
Measuring 73mm (W) x 65mm (H) x 87mm (D), the waterblock features a plastic housing paired with a broad copper base specifically sized to blanket the oversized integrated heatspreader of AMD Ryzen Threadripper PRO processors. Rather than locking the cooler to a single server socket, SilverStone includes mounting hardware for workstation sockets AMD sTR5, SP6, and TR4 alongside mainstream AMD AM5 and AM4 as well as Intel LGA 1851, LGA 1700, LGA 1200, and LGA 115x platforms.
Inside the block sits a next-generation three-phase, six-pole pump motor spinning at 3,200 RPM (±10%) on a 12V / 0.38A draw via a 3-pin 2510 connector. SilverStone claims this motor doubles the maximum liquid flow rate (LPM) over standard designs and explicitly advises users to disable PWM or DC voltage stepping on the motherboard pump header in the BIOS so the motor receives a steady 12V supply at all times.
Rounding out the design for high-performance liquid-cooled builds, the pump housing incorporates built-in ARGB LED lighting synced through motherboard software and a rotatable top cap so the SilverStone snowflake emblem stays upright regardless of tube routing. Better yet, the waterblock is modular and supports SilverStone's optional IMF70 70mm directional fans, which clip directly onto the pump body to blow fresh air across surrounding motherboard VRMs and memory modules. SilverStone has not yet announced retail pricing or a release date for the Hailstone 420.
My Take on the Spec Sheet
What immediately stands out to me on the SilverStone Hailstone 420 is the decision to pair a slim 28mm radiator with beefy 34mm-thick LCP fans. Many 420mm coolers go the opposite route with thick 38mm radiators and standard 25mm fans that struggle to push air through dense fins at lower RPMs. By deepening the fan blades to 34mm on dual ball bearings, SilverStone hits 7.66 mmH2O of static pressure and 123.8 CFM at 2,500 RPM while staying under 39 dBA. Combined with full copper coverage for 450W Threadripper PRO chips on sTR5 and SP6, out-of-the-box brackets for AM5 and LGA 1851, and snap-on IMF70 VRM fan support, this is a no-nonsense thermal workhorse built for serious sustained loads rather than flashy LCD gimmicks.


















